On the right track from the start

On the right track from the start

Design of drying processes with the design space

The time-to-market is a crucial factor in pharmaceutical production. Pharmaceuticals should reach the patient from the laboratory as fast as possible. Early detection of potential risks minimizes unnecessary costs in the production phase.

If the product is to be freeze-dried, it is therefore critical to understand the features of every freeze-dryer thoroughly. This means it is possible to derive a concept for the pilot plant or production facility in the pre-clinical stage of the product. A central element is thus the so-called design space, which outlines the behavior of the system process in a specified area.

freeze-drying process

Ideal freeze-drying process with high tech

Determining the design space

The critical process and material attributes for the quality are correlated in the design space. This produces a threshold where the quality of medicinal products is not exposed to any extreme fluctuations and is controllable. By specifying a design space, the conditions for a sustainable quality of the product are defined in advance.
Design Space

A threshold is the critical product temperature that is required before a collapse occurs.  The second limit is the efficiency of the plant. The course of the chamber pressure and the sublimation rate is dependent on the heat transfer coefficient of the vial and the product resistance, which determines the correlation between the controlled parameters and the product temperature. Changes in the construction or the function of the freeze-dryer as well as product deviations can alter the properties of the freeze-drying cycle and lead to product failures. The sublimation requires a constant and homogeneous heat, which is regulated by the shelf temperature. Irregularities in the plate temperature can result in uncontrolled freeze-drying.

The design space enables you to take into account tolerances in raw materials, the product preparation and the vials in the design of the drying process. This way you achieve a consistently high product quality from the outset.

Your benefits

Optimally defined design limits of the freeze-dryer

Predicting the sublimation rate for vial type and vial size under certain conditions

Increasing the product temperature limit, e.g. for the end of the primary drying

Do you have any unanswered questions or would you like more information?

Our experts are happy to assist you

Our experts are there for you