Bring your machines to the next level

Servo driven paddle wheel located above paddle chain infeed to push the upper part of the product to the side. 

Servo driven double layer lifting device, including necessary electrical controls, to put one stack of product onto the other. 

Rebuild kit to RFID parameter access. 

The new unit is optimized to reduce size change over time and effort

The digital 3D spare parts catalog allows you to maneuver a visual representation of the equipment, identify the part you need quickly and easily then order it from Optima Service. 

Confidently mastering the format change.

Eliminate machine downtime faster with high-speed video recording.

Immediate support from the Optima service team.

To reduce ware out at the pusher arms due to often pusher plate changes the pusher arm is executed with a steel insert.

The upgraded downholder version will close in an 45° angle, downwards together with an inside movement to close the gap after the robot pusher pushed the stack into the pre-compression. 

This kit is to prevent that the bag will move from the shuttle swords before the product is completely loaded into the opened bag, as well as the bag will not torn off the pins.

To generate a stronger vacuum at the suction rails a vacuum blower will be installed instead of the injector pumps.

This conversion is especially for diapers with a suction channel. 

Telescopic active discharge belt, driven by 2 frequency-controlled motors.

As the arm changes the angle during the push, a compensating movement is required to keep the pusher vertical to the product. 

New main-compression plates, straight version, made of Teflon plastic (PTFE), including new support plates.

Quality gate system measures incoming product attributes including the pitch, product dimensions itself (length and width) and the cross direction position.

Stacker paddles or cross conveyor plates can be manufactured with metal powder.

Infrared vision system to detect quality defects on the bag sealing, e.g. open bags, product sealed in the package and holes in the sealing.

Max. package height see current machine specification, equipped only with FESTO cylinder, stroke as current.

The new design ensures steadily fixed orientation (suction surface on suction head always horizontal) of the suction head. 

Spools on secondary chain for bag stack stabilization are replaced by automatic solution.

To replace the current U-shape (1-piece) shuttle with two shuttle sides and one bottom plate.

Automated wicket loading system.

To adjust the width of the stacker funnel for a count change one/two positioning drives can be installed instead of the one/two hand wheels. 

To adjust the width of the pick up for a count change a positioning drive can be installed instead of the hand wheel.

To adjust the width of the grouping table for a count change a positioning drive can be installed instead of the hand wheel.